The Cold Point 5QT Series zerOzone chassis provides environment friendly, high efficiency cooling and heating where individual, quiet control is a priority. This application flexible unit is a direct replacement for Carrier 50QT series 1 1/2 and 2-ton reverse cycle defrost heat pump chassis. The chassis is a part of a complete system, which consists of the chassis, a wall sleeve/cabinet with louver that is typically built into the building exterior wall, ductwork, and wall thermostat. The chassis contains the compressor, indoor and outdoor heat exchangers, evaporator and condenser motors and fans, electric heaters, and all controls except the wall thermostat. The chassis slides into the sleeve/cabinet for easy removal. The 5QT chassis is dimensionally identical to the original for a fast, easy, and trouble-free installation. Proven technology, quality components, careful design and testing, and the latest in environment friendly technology mean long unit life, user satisfaction, and lower energy costs. These full-range heat pump units with reverse cycle defrost include a bi-flow thermostatic expansion valve, oversized suction accumulator, electronic defrost control, compressor crankcase heater, built-in electric heaters with overheat protection, high efficiency PSC evaporator and condenser blower motors, and dynamically balanced DWDI blower wheels. Also standard is the Rust-Block* corrosion protection system, evaporator freeze protection, high-pressure over protection, and lock out circuit. Cold Point backs the 5QT with a customer friendly one-year parts and labor warranty and five-year compressor warranty, (see Warranty document for details).

Features & Benefits

• Designed for easy installation and compatibility Dimensionally identical to original Carrier chassis
• Full range heat pump operation with reverse cycle defrost
• Exclusive Rust-Block corrosion protection
• High efficiency PSC-type evaporator and condenser fan motors with built-in temperature protection
• Quiet, durable and efficient compressor with built-in pressure and temperature protection
• Powder painted drain pans
• High efficiency copper tube-aluminum fin evaporator and condenser coils
• DWDI centrifugal evaporator and condenser blowers
• Electronic defrost control
• Oversized suction accumulator
• Nichrome electric heaters with built-in limit switches
• Slide-out electric heater/blower module for easy room-side service
• Compressor crankcase heater
• High pressure switch with lock-out circuit
• Refrigerant circuit access ports
• Thermostatic bi-flow expansion valve
• Positive shift reversing valve
• Precision charged with zerOzone R-410A refrigerant
• Made in USA

Specifications

• Voltage Rating: 208/230 Volt AC
• Current Rating: 1.2 Amp (Evaporator Motor), 1.4 Amp (Condenser Motor), 9.2 Amp (RLA), 49.1 Amp (LRA), 11.8 Amp (Total), 14.1 Amp (MCA), 37.5/41.8 Amp (Heater)
• Frequency Rating: 60 Hertz
• Number of Phases: 1
• Power Rating: 1/5 HP (Evaporator Motor), 1/4 HP (Condenser Motor), 7.8/9.6 Kilowatt
• Cooling Capacity: 21400 BTU/Hour
• Temperature Control Type: Thermostat
• Enclosure Material: Heavy Gauge G90 Steel
• Enclosure Finish: Galvanized
• Size: 31-3/8 Inch Width x 43-7/8 Inch Height
• Weight: 276 Pound
• Approval: UL
• Compressor Type Reciprocating
• Heating Capacity 14700 BTU/Hour
• Refrigerant Type R-410A
• Energy Efficiency 8.1 (EER), 2.9 (COP)
• Flow Rating 680 CFM
• Filter Size 20 Inch x 25 Inch x 1 Inch

• 50QT-24 - 2 TON COLD PT ZERO ZONE THRU THE WALL HEAT PUMP