Features & Benefits

• Unit Cabinet Composed of Heavy Gauge Galvanized Steel Casing with a Baked Polyester Powder
• Condenser Fan Four Blade Glass Reinforced Polypropylene Petal Mounted on a Cast Aluminum Hub Construction and Shall be Dynamically Balanced and Corrosion Resistant. Vertical Discharged Air. Motor and Blade Shall be Protected by Coated Steel Wire Safety Guard
• Condenser Fan Permanently Lubricated Sleeve Bearing and Class F Insulation
• Compressor Unit Shall Contain One Fully Hermetic Scroll Compressor. Compressor Motor Shall be Suction Gas Cooled. Internal Motor Protection. Externally Protected by Low and High Pressure Cutout Devices. Individual Vibration Isolators
• Pump Integral Circulating Pump Shall be Stainless Steel with High Efficiency Enclosed Motor. Unit Shall Have Chilled Liquid Solution Piping to the Exterior of the Cabinet
• Evaporator Shall have One Independent Refrigerant Circuit and One Liquid Solution Circuit. Rated for a Refrigerant Side Working Pressure of 450 PSI and a Maximum Water Side Working Pressure of 60 PSI. Single Pass, ANSI Type 316 Stainless Steel, Brazed Plate Construction. Externally Insulated with Closed Cell, Elastomeric Foam ASTM518
• Condenser Coil Shall be Air-Cooled with Integral Sub-Cooler. One Independent Refrigerant Circuit. Constructed of Rifled Copper Tubing Mechanically Bonded to Aluminum Fins. Cleaned and Dehydrated. Factory Leak Tested to 450 PSI
• Refrigerant Circuit Each Circuit Shall Contain a Sight Glass, Liquid Line Filter, Thermal Expansion Valve, Refrigerant Charge of R407C and POE Compressor Oil

Specifications

• Type: High Efficiency
• Voltage Rating: 208/230 Volt AC
• Current Rating: 23.5 Amp Rated Load, 137 Amp Locked Rotor (Compressor), 2.5 Amp Full Load (Condenser Fan Motor), 4.1 Amp Full Load (Pump Motor), 40 Amp (Minimum Circuit Capacity), 50 Amp (Maximum Overcurrent Protection)
• Frequency Rating: 50/60 Hertz
• Number of Phases: 1
• Cooling Capacity: 48000 BTU/Hour
• Connection Type: Terminal Block
• Operating Temperature: 120 Deg F (Ambient)
• Enclosure Material: Heavy Gauge Steel
• Enclosure Finish: Galvanized with Baked Polyester Powder
• Size: 35.25 Inch Length x 40.875 Inch Width x 57.75 Inch Height
• Weight: 575 Pound
• Approval: UL, ETL, ISO 9002
Water Connection Size 1 Inch Male Threaded (Supply), 1.25 Inch Female Threaded (Return); Refrigerant Type R407c; Refrigerant Charge 14 Pound; Compressor Type Copeland Scroll; Motor Type Internal Overload Protected Totally Enclosed 1-Speed Direct Drive (1) 1130 RPM Condenser Fan; Heat Exchanger Brazed Plate; Maximum Pump Head Pressure 50 Foot; Internal WPD 8.5 Foot of Head; Flow Rating 5.5 to 8.6 GPM; Water Temperature 44 Deg Supply, 54 Deg Return; Minimum Solution Content 25 Gallon; Expansion Tank Size 2 Gallon; Includes 1/2 HP Integral Pump; Application Global Residential and Light Commercial MicroClimates