Reznor Venturion® Indoor Duct Furnaces were developed to provide an annual fuel use improvement of up to 25% when compared with gravity-vented duct furnaces. The use of a factory-installed power venter, with metered combustion air, limits burner flue losses while reducing the required vent pipe size. A sealed vent product collection chamber, in lieu of a draft diverter, reduces the loss of dilution air from the room in both the on and off cycles. The Series EEDU duct furnaces are available for use with either natural or propane gas, as specified, in sizes from 75,000 through 400,000 BTUH gas input. They are designed for use as heating components in heating, heating/cooling, or makeup air systems and require a separate blower system for air delivery. The furnace has a Reznor Thermocore® aluminized steel heat exchanger with venturi-design tubes. The die formed burners are of aluminized steel and include flared ports with stainless steel insert. The EEDU model is approved for temperature rise of 50° to 90°F and includes “finger-baffles” for proper air distribution at these lower air volumes. Removing the finger-baffles will increase the air flow. These field converted units are approved for a temperature rise of 20° to 70°F.

Specifications

• Type: Steam
• Voltage Rating: 120 Volt AC
• Contact Rating: 10 Amp
• Frequency Rating: 60 Hertz
• Humidity Rating: 0 to 95 Percent RH Non-Condensing
• Overall Dimensions: 11-1/4 Inch Width x 9 Inch Depth x 19 Inch Height
• Mounting Type: Duct/Remote
• Temperature Rating: 34 to 104 Deg F (Steam Humidifier), -50 to 250 Deg F (Remote Hose/Nozzle)
• Inclusions/Features: Duct Template Hardware, Saddle Valve, Drain Supply Water Tubing, Duct Nozzle, Mounting Bracket, Backflow Valve, RO Water Filter Kit, HumidiPRO Digital Humidity Control
• Used With: Humidifier, Outdoor Temperature Sensor
• Applicable Standard: UL, FM, NEC, ANSI/NFPA 70, CEC
Capacity 9 Gallon per Day; Area 8,000 to 18,400 Cubic Feet; Power Supply 120 Volt AC; Field Wiring Terminal 18 to 22 Gauge Solid; HVAC Power/Airflow Monitor 10 Milliamp Resistive at 24 Volt AC; Fan Relay Output 1.5 Amp (Full Load), 7.5 Amp (Locked Rotor) at 24 Volt AC; Heat and Backup 15 Amp Resistive at 120 Volt AC; Fill Solenoid 0.1 Amp at 120Volt AC, 0.5 PF; Drain Solenoid 0.1 Amp at 120 Volt AC, 0.5 PF; Humidistat Output 10 Milliamp Resistive at 24 Volt AC; Humidistat Power Supply 100 Milliamp at 24 Volt AC; Draining Temperature Rating 34 to 212 Deg F