Reznor Model SC Series Separated Combustion gas-fired duct furnaces are designed to separate their combustion air from the air in the heated space. These units are designed and manufactured in accordance with the ANSI definition of "separated combustion." While discharging exhaust air, the power venter draws in combustion air from the outside atmosphere. Exclusive outside combustion air prevents dirt, lint, dust or other contaminants in the heated space from entering the combustion zone of the furnace. The separated combustion furnace is designed for use in building areas with negative pressure and/or extremely dirty or mildly corrosive atmospheres. A specially designed combustion air inlet/vent terminal assembly available with SC Series units requires only a single-building penetration for both exhaust and combustion air. Reznor Model SC Series 6 duct furnaces are available in sizes from 100,000 through 400,000 BTUH gas input for use with either natural or propane gas, as specified. These units are designed for duct connection and require a separate air moving device upstream from the furnace. Model SC Series 6 furnaces are 80% thermal efficient.

Specifications

• Type: Gas-Fired, Separated Combustion
• Btu per Hour: 100000 (Input), 80000 (Output)
• Capacity: 820 to 1480 CFM (With Finger Baffle), 985 to 3700 CFM (Without Finger Baffle)
• Control Type: 115 Volt
• Size: 22-15/32 Inch Width x 26 Inch Depth x 32-1/4 Inch Height
• Gas Inlet Size: 1/2 Inch
• Vent Size: 40 Foot Length (6 Inch Pipe)
• Inclusion/Features: Aluminized Steel Heat Exchanger, Aluminized Steel Burner and Stainless Steel Insert, 115 Volt Venter Motor with Stainless Steel Shaft, 24 Volt Control Voltage Transformer, Redundant Single-Stage Combination Gas Valve, Spark-Ignited Intermittent Safety Pilot, High Limit Safety Cutout, Post-Purge Control Sequence, Terminal Block Wiring, Side Access, Adjustable Fan Control, Threaded Suspension Coupling
• Fuel Type Propane Gas
• Current Rating 1.9 Amp (Full Load), 0.83 Amp at 24 Volt (Control)
• Thermal Efficiency 80 Percent
• Application Commercial, Industrial, Showroom, Workshop, School, Hospital/Medical, Sports Facility, Water Treatment, Warehouse, Food and Beverage
• Applicable Standard ANSI Z83.8, CSA CGA 2.6, CQS