Reznor's EEDU indoor duct furnaces, with 80% thermal efficiency, were developed to provide an annual fuel use improvement of up to 25% when compared with gravity-vented duct furnaces. The use of a factory-installed power venter, with metered combustion air, limits burner flue losses while reducing the required vent pipe size. A sealed vent product collection chamber, in lieu of a draft diverter, reduces the loss of dilution air from the room in both the on and off cycles.

Features & Benefits

• Energy Efficient Indoor
• Combustion Air Pressure Switch
• Redundant Single-Stage Combination Gas Valve
• Spark-Ignited Intermittent Safety Pilot with Electronic Flame Supervision
• Burner Rack Access (Pullout Drawer)
• Hanger/Support Angle

Specifications

• Type: 1-Stage, Power-Vented, Gas-Fired
• Btu per Hour: 225000 (Input), 180000 (Output)
• Capacity: 1840 to 3315 CFM
• Control Type: Transformer
• Size: 26 Inch Width x 25-5/8 Inch Depth x 35-3/4 Inch Height
• Gas Inlet Size: 1/2 Inch
• Vent Size: 5 Inch
• Inclusion/Features: Orifice for Natural Gas, Aluminized Steel Heat Exchanger, Aluminized Steel Burner with Stainless Steel Insert, Factory-Installed Power Venter, 24 Volt Control Voltage Transformer
• Voltage Rating 120 Volt
• Power Rating 65.9 Kilowatt
• Current Rating 2 Amp (Full Load), 0.7 Amp (Control)