HomeHome
HomeHome
HomeHome
HomeHome
Carrier

2-Ton Horizontal Water Source Heat Pump R410A 208/230V-1, Left Return, Right Discharge

SKU50PCH024ECC3ECC1
50PCH024ECC3ECC1_001.jpg
Carrier

2-Ton Horizontal Water Source Heat Pump R410A 208/230V-1, Left Return, Right Discharge

SKU50PCH024ECC3ECC1

    Description

    50PCH024ECC3ECC1
    50PCH = AquazoneTM Compact Water Source Heat Pump - Horizontal Configuration (R410A)
    024 = 2 Ton Capacity
    E = Left Return, Right Discharge, PSC Blower Motor
    C = Standard C Microprocessor Control
    C = Standard Options. Non-Coated Copper Air Coil
    3 = 208/230-1-60
    E = Current Revision
    C = No Valves
    C = Standard Range (50 to 100F)
    1 = No Factory Installed Options

    Performance Features

    • EERs up to 17.7
    • Non-ozone depleting Puron® refrigerant (R-410A)
    • Capacities of 1/2 to 6 tons
    • Standard PSC (permanent split capacitor) blower motor or optional constant torque ECM (Electronically Commutated Motor) available
    • Rotary compressor (007-015), reciprocating compressor (018-042) and scroll compressor (048-070)
    • Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 50° to 100° F. Optional extended range package available with range of 25° F to 110° F.
    • Fully insulated unit with acoustic type insulation
    • Mute package available for quiet operation
    • Complete C and Deluxe D controls available with DDC options
    • Performance monitor equipped
    • Copper or cupronickel heat exchanger
    • MERV 8 and MERV 13 filters available
    • Hot gas reheat and/or hot gas bypass available
    • Waterside economizer available
    • Electrical disconnect available
    • Exceeds ASHRAE 90.1 performance requirements
    • Rated in accordance with ARI/ISO 13256-1

    Maintenance Features

    • Three service panels for servicing compressor section
    • All service may be done through large removable front or side panels
    • Blower housing can be serviced without disconnecting ductwork
    • Easy removal of control box for access to all refrigerant components
    • Refrigerant circuit equipped with high/low pressure ports
    • No tools required to change filters
    • Standard 1-in. filter

    Installation Features

    • Compact footprint
    • Units may be mounted in ceilings, closets, attics, etc.
    • Ducted or free return connections
    • All units pre-wired and factory charged with refrigerant
    • Horizontal units include factory-installed hanger isolation brackets
    • Water and condensate connections are FPT and secured to cabinet
    • Single point electrical connection

    Reliability Features

    • Galvanized steel construction
    • Stainless steel, coated, and insulated condensate pan
    • Tin-Electro-Plated Copper Tubing /w Aluminum Fin coils available for corrosive environments
    • Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube air-to-refrigerant heat exchanger
    • Microprocessor control with DDC (Direct Digital Controls) options
    • UL and CSA certified

    Standard Limited Warranty

    • One year parts on all other parts

    Specifications

    • BrandCarrier
    • AvailabilityAvailable for Delivery
    • Warehouse AvailabilityMALD
    • Discharge ConfigurationRight
    • FeaturesStandard Range
    • RefrigerantR410A
    • Return ConfigurationLeft
    • Tonnage2
    • TypeHorizontal
    • Water Connection Size FTP (in)3/4"
    • WSHP Filter Size16" x 25"
    • Motor Phase1
    • Rated Voltage208/230V

    Equipment Parts List

    There is no data available for this product