Features & Benefits

• Circuit breaker protected transformer for 24-volt controls
• Integrated circuit board with diagnostic indicator lights
• High temperature limit control
• Rubber-in-sheer vibration isolation
• L50 bearing rating with a life expectancy of 150000 hours
• Socketed, high quality switching relays to facilitate service
• All service and vent connections from a single side
• Through the cabinet or through the base gas connections (Model RDH)
• Engineered heat exchanger condensate management
• Three hinged service doors with heavy duty hardware
• Heavy gauge steel base
• Double wall cabinet with insulation
• Double wall downturn plenum cabinet
• Cooling coil module with coil
• Discharge Duct Flange
• Evaporative cooling module
• Discharge temperature low limit
• Over/under voltage or phase loss protection
• Gas pressure switches (high, low or both)
• Variable frequency drive (factory-installed is also available)
• Thermostats to match analog controls
• Gas pressure regulator
• Smoke detector (in ductwork)
• Remote control console and unit monitoring
• Fusible and Non-fused disconnect Switch (NEMA 3R) (Model RDH)
• Vertical Vent Extension Kit (Model RDH)
• 16" Insulated Roof Curb (Model RDH)
• Main unit disconnect switch
• M-Series condenser

Specifications

• Type: High Efficiency
• Voltage Rating: 115/208/230/460/575 Volt AC
• Current Rating: 3 Amp (Full Load), 1 Amp (Control)
• Number of Phases: 1 or 3
• Temperature Control Type: Thermostat
• Enclosure Material: Titanium Stabilized Aluminized Steel Heat Exchanger
• Weight: 793 Pound
• Approval: ETL (Canada and US), CSA 2.6, CQS
• Heating Capacity 350000 BTU/Hour (Input), 2735000 BTU/Hour (Output)
• Fuel Type Natural/Propane Gas
• Connection Size 3/4 Inch
• Thermal Efficiency 81 Percent
• Air Flow Rating 1843 to 5061 CFM (Cooling), 2188 to 6563 CFM (Heating)
• Vent Connection Size 6 Inch Diameter
• Vent Length 50 Foot
• Application Retail, Showroom, Office, Workshop, School, Exhibition Hall, Hospital/Medical, Sports Facility, Church, Water Treatment, Transportation Terminal, Industrial Manufacturing, Warehouse/Distribution, Food and Beverage, Pharmaceutical and Biotech
• Applicable Standard ANSI Z83.8