50PCH015ZCC3ECC1
50PCH = Aquazone^TM Compact Water Source Heat Pump - Horizontal Configuration (R410A)
015 = 1-1/4 Ton Capacity
Z = Right Return, Left Discharge, PSC Blower Motor
C = Standard C Microprocessor Control
C = Standard Options. Non-Coated Copper Air Coil
3 = 208/230-1-60
E = Current Revision
C = No Valve Options
C = Standard Range (50 to 100F)
1 = No Factory Installed Options

• EERs up to 17.7
  
• Non-ozone depleting Puron® refrigerant (R-410A)
  
• Capacities of 1/2 to 6 tons
  
• Standard PSC (permanent split capacitor) blower motor or optional constant torque ECM (Electronically Commutated Motor) available
  
• Rotary compressor (007-015), reciprocating compressor (018-042) and scroll compressor (048-070)
  
• Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 50° to 100° F. Optional extended range package available with range of 25° F to 110° F.
  
• Fully insulated unit with acoustic type insulation
  
• Mute package available for quiet operation
  
• Complete C and Deluxe D controls available with DDC options
  
• Performance monitor equipped
  
• Copper or cupronickel heat exchanger
  
• MERV 8 and MERV 13 filters available
  
• Hot gas reheat and/or hot gas bypass available
  
• Waterside economizer available
  
• Electrical disconnect available
  
• Exceeds ASHRAE 90.1 performance requirements
  
• Rated in accordance with ARI/ISO 13256-1
  

• Three service panels for servicing compressor section
  
• All service may be done through large removable front or side panels
  
• Blower housing can be serviced without disconnecting ductwork
  
• Easy removal of control box for access to all refrigerant components
  
• Refrigerant circuit equipped with high/low pressure ports
  
• No tools required to change filters
  
• Standard 1-in. filter
  

• Compact footprint
  
• Units may be mounted in ceilings, closets, attics, etc.
  
• Ducted or free return connections
  
• All units pre-wired and factory charged with refrigerant
  
• Horizontal units include factory-installed hanger isolation brackets
  
• Water and condensate connections are FPT and secured to cabinet
  
• Single point electrical connection
  

• Galvanized steel construction
  
• Stainless steel, coated, and insulated condensate pan
  
• Tin-Electro-Plated Copper Tubing /w Aluminum Fin coils available for corrosive environments
  
• Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube air-to-refrigerant heat exchanger
  
• Microprocessor control with DDC (Direct Digital Controls) options
  
• UL and CSA certified
  

• One year parts on all other parts