1.5-Ton Horizontal Water Source Heat Pump R410A 265V-1, Right Return, Left Discharge

  • Buyer EQUI
  • Brand Carrier
  • Cycle 60
  • Discharge Configuration Left
  • Motor Phase 1
  • Rated Voltage 265V
  • Refrigerant R410A
  • Return Configuration Right
  • Tonnage 1.5
  • Water Connection Size FTP (in) 3/4"
  • WSHP Filter Size 16" x 20"
  • Weight 174 lb
  • Features Standard Range
  • Type Horizontal

50PCH = AquazoneTM Compact Water Source Heat Pump - Horizontal Configuration (R410A)
018 = 1-1/2 Ton Capacity
Z = Right Return, Left Discharge, PSC Blower Motor
C = Standard C Microprocessor Control
C = Standard Options. Non-Coated Copper Air Coil
4 = 265-1-60
E = Current Revision
C = No Valves
C = Standard Range (50 to 100F)
1 = No Factory Installed Options

Performance Features

  • EERs up to 17.7
  • Non-ozone depleting Puron® refrigerant (R-410A)
  • Capacities of 1/2 to 6 tons
  • Standard PSC (permanent split capacitor) blower motor or optional constant torque ECM (Electronically Commutated Motor) available
  • Rotary compressor (007-015), reciprocating compressor (018-042) and scroll compressor (048-070)
  • Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 50° to 100° F. Optional extended range package available with range of 25° F to 110° F.
  • Fully insulated unit with acoustic type insulation
  • Mute package available for quiet operation
  • Complete C and Deluxe D controls available with DDC options
  • Performance monitor equipped
  • Copper or cupronickel heat exchanger
  • MERV 8 and MERV 13 filters available
  • Hot gas reheat and/or hot gas bypass available
  • Waterside economizer available
  • Electrical disconnect available
  • Exceeds ASHRAE 90.1 performance requirements
  • Rated in accordance with ARI/ISO 13256-1

Maintenance Features

  • Three service panels for servicing compressor section
  • All service may be done through large removable front or side panels
  • Blower housing can be serviced without disconnecting ductwork
  • Easy removal of control box for access to all refrigerant components
  • Refrigerant circuit equipped with high/low pressure ports
  • No tools required to change filters
  • Standard 1-in. filter

Installation Features

  • Compact footprint
  • Units may be mounted in ceilings, closets, attics, etc.
  • Ducted or free return connections
  • All units pre-wired and factory charged with refrigerant
  • Horizontal units include factory-installed hanger isolation brackets
  • Water and condensate connections are FPT and secured to cabinet
  • Single point electrical connection

Reliability Features

  • Galvanized steel construction
  • Stainless steel, coated, and insulated condensate pan
  • Tin-Electro-Plated Copper Tubing /w Aluminum Fin coils available for corrosive environments
  • Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube air-to-refrigerant heat exchanger
  • Microprocessor control with DDC (Direct Digital Controls) options
  • UL and CSA certified

Standard Limited Warranty

  • One year parts on all other parts