2-Ton Horizontal Water Source Heat Pump R410A 208/230V-1, Left Return, Right Discharge

Out of Stock
  • Availability: Available for Delivery
  • Category: Water Source Heat Pump
  • Warehouse Availability: MALD
  • Discharge Configuration: Right
  • Features: Standard Range
  • Motor Phase: 1
  • Rated Voltage: 208/230V
  • Refrigerant: R410A
  • Return Configuration: Left
  • Tonnage: 2
  • Type: Horizontal
  • Line Voltage (60Hz): 208V, 230V
  • Refresh Carrier Documents: Ready
  • Refresh Carrier Documents: Ready
  • Refresh Carrier Images: Done
  • Sx.e Stocking Unit: Each
  • Sx.e Vendor: Carrier
  • Water Connection Size FTP (in): 3/4"
  • WSHP Filter Size: 16" x 25"

50PCH = AquazoneTM Compact Water Source Heat Pump - Horizontal Configuration (R410A)
024 = 2 Ton Capacity
E = Left Return, Right Discharge, PSC Blower Motor
C = Standard C Microprocessor Control
C = Standard Options. Non-Coated Copper Air Coil
3 = 208/230-1-60
E = Current Revision
C = No Valves
C = Standard Range (50 to 100F)
1 = No Factory Installed Options

Performance Features

  • EERs up to 17.7
  • Non-ozone depleting Puron® refrigerant (R-410A)
  • Capacities of 1/2 to 6 tons
  • Standard PSC (permanent split capacitor) blower motor or optional constant torque ECM (Electronically Commutated Motor) available
  • Rotary compressor (007-015), reciprocating compressor (018-042) and scroll compressor (048-070)
  • Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 50° to 100° F. Optional extended range package available with range of 25° F to 110° F.
  • Fully insulated unit with acoustic type insulation
  • Mute package available for quiet operation
  • Complete C and Deluxe D controls available with DDC options
  • Performance monitor equipped
  • Copper or cupronickel heat exchanger
  • MERV 8 and MERV 13 filters available
  • Hot gas reheat and/or hot gas bypass available
  • Waterside economizer available
  • Electrical disconnect available
  • Exceeds ASHRAE 90.1 performance requirements
  • Rated in accordance with ARI/ISO 13256-1

Maintenance Features

  • Three service panels for servicing compressor section
  • All service may be done through large removable front or side panels
  • Blower housing can be serviced without disconnecting ductwork
  • Easy removal of control box for access to all refrigerant components
  • Refrigerant circuit equipped with high/low pressure ports
  • No tools required to change filters
  • Standard 1-in. filter

Installation Features

  • Compact footprint
  • Units may be mounted in ceilings, closets, attics, etc.
  • Ducted or free return connections
  • All units pre-wired and factory charged with refrigerant
  • Horizontal units include factory-installed hanger isolation brackets
  • Water and condensate connections are FPT and secured to cabinet
  • Single point electrical connection

Reliability Features

  • Galvanized steel construction
  • Stainless steel, coated, and insulated condensate pan
  • Tin-Electro-Plated Copper Tubing /w Aluminum Fin coils available for corrosive environments
  • Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube air-to-refrigerant heat exchanger
  • Microprocessor control with DDC (Direct Digital Controls) options
  • UL and CSA certified

Standard Limited Warranty

  • One year parts on all other parts