HomeHome
HomeHome
HomeHome
HomeHome
Amprobe

Multimeter, 600V 400A Model ACD-14 Digital Clamp-On

SKUACD-14
ACD-14_001.jpg
Amprobe

Multimeter, 600V 400A Model ACD-14 Digital Clamp-On

SKUACD-14

    Description

    Danaher Corporation (Amprobe) 4/40/400/600 VAC, 400 mV, 4/40/400/600 VDC, 40/400/600 A AC, 400 Ohm, 4/40/400 Kilo Ohm, 4/40 Mega Ohm, 40 to 400 Hz Jaw/10 Hz to 100 kHz Test Lead, 5/500 Nanofarad, 50/500/3000 Microfarad, Dual Display, Digital Clamp Multimeter

    The Amprobe ACD-14 TRMS-PLUS Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

    Features & Benefits

    • Upflow or Horizontal Right as Shipped (Field-Convertible for Down-Flow or Horizontal Left Applications)
    • Constant Torque ECM Speeds and Torques are Controlled by Software Embedded in the Motor to Maintain Constant Torque
    • Motors are Pre-Programmed at the Factory
    • Low Leakage Cabinet
    • Direct Drive Blowers Circulate Air Quietly and Efficiently
    • Electronic Control Board
    • High Efficiency Rifled Copper Tubes/Enhanced Aluminum Fins Provide Maximum Heat Transfer
    • Made in USA

    Specifications

    • Type: Multi-Position, High Efficiency
    • Voltage Rating: 120 Volt AC (Motor)
    • Current Rating: 14.3 Amp (MCA), 10.9 Amp (Motor), 25 Amp (Fuse)
    • Frequency Rating: 60 Hertz
    • Number of Phases: 1
    • Power Rating: 1 HP
    • Cooling Capacity: 48000 BTU/Hour
    • Temperature Control Type: Thermostat
    • Connection Type: Circuit Breaker
    • Enclosure Material: Steel
    • Enclosure Finish: Galvanized
    • Size: 24-1/2 Inch Width x 22-1/4 Inch Depth x 57 Inch Height
    • Approval: UL1995, ETL (Canada and US)
    • Heating Capacity 98000 BTU/Hour at 180 Deg F 3.5 GPM, 109950 BTU/Hour at 180 Deg F 5 GPM; Metering Device Non-Bleed Air Conditioner or Heat Pump R-410 Thermostatic Expansion Valve; Refrigerant Type R-22, R-410A; Number of Heating Coil Rows 4; Motor Type Constant Torque ECM; Flow Rate 1652 CFM (Tap 5) at 0.5 ESP; Exclude Pump and Check Valve; Applicable Standard AHRI, HARDI

    Specifications

    • BrandAmprobe
    • TypeElectrical Power Testing

    Equipment Parts List

    There is no data available for this product