3.0T G/E RTU PURON 460-3 MED FAN

48KCEA04A2A6-0A0A0 MFG #: 48KCEA04A2A6-0A0A0
  • Blower Motor Type ECM
  • Brand Carrier
  • BTU Input 115000
  • Capacity Modulation 1-Stage
  • CFM 1500
  • Condenser Motor HP 1/8
  • Cooling Capacity 35400
  • Cycle 60
  • Drain Connection Size 4-Mar
  • Energy Star Rated No
  • Heat Size Medium Gas Heat
  • Height 33.38 in
  • Length 74.38 in
  • Minimum Ambient Temperature -20 °F
  • Motor Phase 3
  • Package Quantity 1 ea
  • Refrigerant R410A
  • Sound Level 76 dBA
  • Stage 1-Stage
  • Tonnage 3
  • Voltage 460
  • Weight 490 lb
  • Width 46.75 in
48KCEA04A2A6-0A0A0
48KC = Gas Heat Packaged Rooftop
E = Medium Gas Heat
A = Standard One Stage Cooling Models
04 = 3 Tons
A = No Smoke or CO2 sensor
2 = Medium Static Option
A = Al/Cu - Al/Cu
6 = 460/3/60
0 = Electro-mechanical Controls can be used with W7212
EconoMi$er IV (Non-Fault Detection and Diagnostic)
A = No Air Intake or Exhaust
0 = No Convenience Options
A = No Electrical Protection
0 = Standard Packaging

Performance Features

  • ASHRAE 90.1 compliant
  • Single-stage cooling capacity control
  • Up to 14.1 SEER and 12.0 EER
  • Gas efficiencies up to 82%
  • Cooling operating range up to 115 °F (46°C) and down to 25°F (-4°C) using winter start kit
  • Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection

Maintenance Features

  • Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
  • Access panels with easy grip handles
  • Innovative, easy starting, no-strip screw feature on unit access panels
  • Tool-less filter access door
  • Optional hinged access panels also available
  • Direct Drive – ECM indoor fan motor standard with optional belt drive systems available
  • Two-inch disposable return air filters

Installation Features

  • Same footprint as installed Carrier 3-5 ton rooftops back to 1989, reducing installation costs and time
  • Field convertible from vertical to horizontal airflow configuration
  • Provisions for thru-the-bottom power entry capability as standard
  • Single point gas, electric, and controls connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots

Reliability Features

  • Scroll compressors with internal line-break overload protection
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Totally enclosed condenser motors with permanently lubricated bearings
  • Low pressure and high-pressure switch protection
  • Exclusive IGC anti-cycle protection for gas heat operation
  • Solid-state electronic direct spark ignition system and flame roll-out safety protector

Standard Limited Warranty

  • 10 years parts only heat exchanger - aluminized
  • 15 years parts only heat exchanger - stainless steel
  • 5 years parts only compressor
  • One year parts only on all other parts
  • Additional extended warranty packages available
QTY