FURNACE CONTROL (GOODMAN)

ICM286 MFG #: ICM286
  • Buyer PART
  • Brand ICM Controls
ICM Controls 4.5" x 6" x 1", 98 to 132 VAC 60 Hz Line, Microprocessor Based, Control Board for Furnace

Features & Benefits

  • Low Cost
  • Controls Inducer and Blower Fan Motor, Hot Surface Igniter and Gas Valve
  • Monitors Timing, Trial for Ignition, Flame Sensing, Pressure and Limit Switch and Lockout
  • Designed for 100 Percent Gas Shutoff in Case of Ignition Failure
  • Reverse Polarity Protection
  • Compatible with 24 Volt AC Standard Thermostat
  • Compatible with LP or Natural Gas
  • Provides Diagnostic LED to Aid in Testing or Troubleshooting
  • Made in USA

Specifications

  • Type: Control Board, Microprocessor Based
  • Used On: Furnace
  • Voltage Rating 98 to 132 Volt AC 60 Hertz (Line)
  • Current Rating 30 Amp at 240 Volt AC (Cool Blower), 20 Amp at 240 Volt AC (Heat), 4 Amp (Full Load), 8 Amp (Locked Rotor) at 120 Volt AC (Inducer Motor), 10 Amp (Full Load) at 120 Volt AC (Igniter), 5 Amp at 120 Volt AC (Humidifier), 5 Amp at 120 Volt AC (Electric Air Cleaner)
  • Power Rating 2 HP at 240 Volt AC (Cool Blower)
  • Size 4.5 Inch Length x 6 Inch Width x 1 Inch Height
  • Time Delay 30 Second (Heat Blower ON), 90/120/150/180 Second (Heat Blower Off), 5 Second (Cool Blower ON), 45 Second (Cool Blower Off)
  • Ignition Trial Time 7 Second
  • Prepurge Time 15 Second
  • Total Trial for Ignition 3
  • Auto Reset 60 Minute
  • Temperature Rating -40 to 176 Deg F
  • Humidity Rating 5 to 95 Percent RH (Non-Condensing) at 131 Deg F