Features & Benefits

• Unit Cabinet Composed of Galvanized Steel with Baked Polyester Powder and High Impact Polymers. Shall be Internally Insulated to Ensure Quiet Operation. Fan Motor Unit Shall Contain a Swing Motor to Modulate the Discharge Air. Blower Wheel Blower Wheel are Tangential and Dynamically Balanced. Water Coil Water Coil Containing 3/8 Inch Copper Tubing Mechanically Bonded to Aluminum Fins. Drain Pan All Drain Pans Shall be Coated on Both the Interior and Exterior with Baked Polyester Powder to Resist Corrosion. The Exterior of All Drain Pans Shall be Insulated with Closed Cell to Prevent Condensation. Pans Shall Contain Drain Tubing that is Accessible from the Back, Bottom and Side of the Unit
• Filter Unit Shall Contain 65 Percent Washable Filter

Specifications

• Type: Universal Mount, 2-Pipe Heat/Cool
• Voltage Rating: 208/230 Volt AC
• Current Rating: 3.18 Amp Full Load (Fan Motor), 3.59 Amp (Minimum Circuit Capacity), 5 Amp (Maximum Overcurrent Protection)
• Frequency Rating: 50/60 Hertz
• Number of Phases: 1
• Cooling Capacity: 5 Ton
• Temperature Control Type: 24 Volt AC Thermostat
• Connection Type: Terminal Block
• Operating Temperature: 120 Deg F (Ambient)
• Enclosure Material: Steel
• Enclosure Finish: Galvanized with Baked Polyester Powder and High Impact Polymer
• Size: 75.78 Inch Length x 9.01 Inch Depth x 25.27 Inch Height
• Weight: 163.14 Pound
• Approval: UL, ISO 9002
• Water Connection Size 1 Inch Inlet x 1 Inch Outlet
• Drain Size 1/2 Inch
• Copper Tube Size 3/8 Inch Diameter
• Motor Type 1/8 HP Internal Overload Protected Totally Enclosed 3-Speed Direct Drive Permanent Split Capacitor Fan
• Rows 4-14 Fin per Inch Cooling
• Flow Rating 1335 CFM
• Test Pressure Rating 350 PSI
• Maximum Inlet Water Temperature 180 Deg F
• Storage Temperature Rating 150 Deg F
• Sound Rating 50 Decibel at 1 Meter
• Includes Blower Wheel, Water Coil, Drain Pan, Filter