Features & Benefits

• CDFSE "surface enclosures" are designed to mount flat on the ceiling and extend only 6 inch into the room
• CCFRE "recessed enclosures" have no protrusions outside recess box, allowing the heater to recess only 7 inch into ceiling space Mounts in T-Bar or permanent ceiling with trim ring
• 208V and 240V heaters can be field-converted from single- to three-phase operation
• Three adjustable airflow patterns from 14 foot ceilings - wide, narrow or asymmetrical patterns
• Automatic Fan Delay Eliminates Cold Drafts on Start-Up and Discharges Residual Heat from the Heater Body During Shut Down
• Automatic thermal cutout - shuts off the heater in the event of over-heating and reactivates heater when temperature returns to normal
• Easy installation - Thumb pins align and temporarily hold enclosure cover to heating section freeing both hands to finish installation

Specifications

• Type: Commercial, Industrial
• Voltage Rating: 208 Volt AC
• Current Rating: 12/18.3/24 Amp
• Power Rating: 2.5/3.8/5 Kilowatt
• Number of Phases: 1, 3
• Heating Capacity: 8.5/13/17.1 KBTU/Hour
• Housing Size: 20 Inch Length x 16-1/2 Inch Width x 5-3/4 Inch Depth (Surface Mount), 23-3/4 Inch Length x 23-3/4 Inch Width x 7 Inch Depth (Recess Mount)
• Material: 20 Gauge Galvanized Steel
• Color: Navajo White
• Heating Element: Copper Brazed Finned Sheathed Steel, 80 Percent Nickel/20 Percent Chromium Element
• Control Type: Built-In Fan Delay, Automatic Thermal Cutout
• Fan/Motor Type: Permanently Lubricated Motor, Totally Enclosed Motor
• Air Flow Rate: 300 CFM
• Mounting: Recessed/Surface/T-Bar
• Approval: UL (Canada and US)
• Grille Finish Phosphatized Baked Enamel
• Temperature Rating 45 to 90 Deg F
• Application Vestibules, Hallway, Workshop, Restroom, Entryway