TL225
Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized. This is called stray or ghost voltages and is caused by the capacity between wires. Because of the very high impedance input of the meter, this stray voltage has nowhere to go which will lead to an incorrect reading on the meter. The solution is to make sure there is a lower impedance across the input terminals of the meter. However, this is not as easy as it seems since it is vital that the safety of the electrician is not compromised.

Features:

• Meter has low input impedance to eliminate stray voltages
• On energized wires, meter will indicate real voltage
• On non-energized circuits, meter will read close to zero (even if there are stray voltages)
• Can be used with all modern meters with standard input spacing
• Safety rating(s): CAT III 1000V, CAT IV 600V

In The Box:

• 1 - Stray Voltage Eliminator (SV225)
• 1 - Safety Shrouded Banana Plug (Red)
• 1 - Safety Shrouded Banana Plug (Black)
• 1 - SureGrip Industrial Test Probe (Red)
• 1 - SureGrip Industrial Test Probe (Black)
• 1 - Accessory Case (C75)